PRODACtest GH - Total hardness test

Water test for measuring the total hardness (TH - permanent hardness) - suitable for fresh and marine water aquaria

Total hardness test set Instructions for use

  1. Rinse the water sample test tube several times with the water to be tested and then fill with sample water exactly to the 5 ml mark *
  2. Add one drop at a time of the reagent contained in the bottle and gently swirl to mix the solution after every drop. Count the number of drops until the solution turns from red to green colour
  3. Once the solution has turned green leave it to stand for 30 seconds. If the colour disappears, add more drops of reagent until the solution remains green
  4. Temporary water hardness is given in German degrees (°dTH) and corresponds to the number of drops of reagent utilized to obtain the green colour. 1 drop corresponds to 1° dTH
  5. You can increase the sensitivity of the test by enlarging the sample size to e.g. 10 ml. In this case each drop of the test solution corresponds to 0.5° dTH

* The meniscus of the water surface has to exactly touch the 5 ml calibration line

Caution

Thoroughly clean the test tube after use, securely seal all reagent containers and store in a cool, dry place away from sunlight
Keep the product out of reach of children!

Content

12 ml reagent solution, glass test tube with sealing cap

Possible Dangers

Pictograms

Signal word: Attention

Danger warnings

H226 Flammable liquid and vapour

Safety information

P102 Keep out of reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P233 Keep container tightly closed.
P403 + P235 Store in a well-ventilated place. Keep cool.
P501 Dispose of contents/container inaccordance with all local/national/international regulation.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Accessories

Disposable Pasteur Pipettes, graduated
For example, for filling all commercially available long-life pH tests and for other tricky filling tasks

€0.49*
Single-use Syringes PE/PP with Luer Plug Connection
Disposable syringes PE/PP with Luer plug connection in different sizes

€0.50*

Similar Products

Duradrakon TH-Plus Hardener Salt Mixture
Hardener salt mixture to increase the total hardness. Especially recommended for shrimp, crayfish and Malawi tanks. Dissolves easily and without clouding.

Content: 0.1 kg (€149.50* / 1 kg)

Variants from €11.95*
€14.95*
PRODACtest KH - Carbonate hardness test
Water test to determine the carbonate hardness (CH). Suitable for fresh and sea water.

€11.99*
Duradrakon T TH-Plus Hardener salt mixture
Hardener salt mixture to increase the total hardness for Tanganyika lake-cichlids

Content: 0.1 kg (€149.50* / 1 kg)

Variants from €11.95*
€14.95*
Tip
Zoobest Alpha Test Total Hardness - TH
Water test to determine the total hardness (TH). Suitable for fresh and sea water.

€6.95*

Water tests (Prodac)

Sold out
PRODAC Speedy Test 7 in 1 - 50 Test strips
Strip test for determining 7 water parameters. 50 strips which means 350 tests possible. Suitable for aquarium and garden pond.

€29.99*
PRODACtest Ca - Calcium
Water test kit for measuring the calcium concentration (Ca). For marine aquaria. The range depends on the measured values

€18.99*
PRODACtest Ca - Calcium - Reagent 3 Refill
Refill of Reagent 3 to PRODACtest Ca - Calcium

€6.99*
Sold out
PRODACtest Fe - Iron
Water test kit for measuring the iron concentration (Fe). Suitable for fresh and marine water. Allows up to 63 tests.

€15.99*
PRODACtest GH - Total hardness test
Water test to determine the total hardness (TH). Suitable for fresh and sea water.

€11.29*
PRODACtest KH - Carbonate hardness test
Water test to determine the carbonate hardness (CH). Suitable for fresh and sea water.

€11.99*
Sold out
PRODACtest NH4/NH3 - Ammonium/Ammonia
Water test kit for measuring the ammonium/ammonia concentration (NH₄/NH₃). Suitable for fresh and marine water. Allows up to 65 tests.

€20.95*
PRODACtest NO2 - Nitrite
Water test kit for measuring the nitrite concentration (NO2). Suitable for fresh and marine water. Allows up to 60 tests.

€14.95*
PRODACtest NO3 - Nitrate test
Water test to determine the nitrate concentration (NO3). Suitable for fresh and sea water.

€19.99*
Sold out
PRODACtest pH - Operating range 4.5 - 9.0
Water test for measuring the pH value. Suitable for freshwater and seawater. Up to 130 applications possible.

€10.90*
Sold out
PRODACtest PO4 - Phosphate
Water test kit for measuring the phosphate concentration (PO4). Suitable for fresh and marine water. Allows up to 48 tests.

€17.99*

Enquiry form

Send us an e-mail. We look forward to hearing from you.

Request form
Privacy
Fields marked with asterisks (*) are required.
Thank you for your enquiry. We have received your enquiry and will get in touch with you as soon as possible.