PRODAC Speedy Test 7 in 1 - 50 Test strips

Quick test for determining 7 water parameters (CH, TH, pH, Cl₂, NO₂, NO₃, CO₂) - suitable for aquarium and garden pond

Strip test · very easy to use · check water parameters quickly and inexpensively!

7 water parameters on one strip

  • NO₃ - Nitrate: 0 - 250 mg/l
  • NO₂ - Nitrite: 0 - 10 mg/l
  • TH - Total hardness: 0 - 16 °dH
  • Cl₂ - Chlorine: 0 - 100 mg/l
  • pH - acid/base value: 6.4 - 8.4
  • CH - Carbonate hardness: 0 - 20 °dH
  • CO₂ Carbon dioxide (from table)

Speedy-Test Instructions for use

  1. Take a test strip out of the tube and close the can immediately.
  2. Dip the test strip into the aquarium or pond water to be measured and swish it back and forth for 1 - 2 seconds.
  3. Remove the strip from the water and shake off the excess water.
  4. Place the test strip on the tube, paying attention to the correct direction.
  5. Read the Cl₂ concentration immediately. *
  6. Wait 60 seconds for all other measurements.
  7. Now compare the colours of the other measurements. *
  8. The CO₂ concentration is determined via the table in the enclosed instructions manual by crossing the values for pH and CH. The recommended CO₂ concentrations are marked in grey.

* Read the result at the point where the color of the strip best matches the color of the chromatic scale.

Caution

Close the test strip tube tightly and store in a cool, dry place away from light.
Keep out of reach of children!

Content

1 tube with 50 test strips (corresponds to 350 tests), instructions manual

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Accessories

Test tube 100 × 16 mm Ø
Simple test tube with flanged rim. Very suitable to calibrate diverse electrodes buffer-economically.

€0.79*

Water tests (Prodac)

Sold out
PRODAC Speedy Test 7 in 1 - 50 Test strips
Strip test for determining 7 water parameters. 50 strips which means 350 tests possible. Suitable for aquarium and garden pond.

€29.99*
PRODACtest Ca - Calcium
Water test kit for measuring the calcium concentration (Ca). For marine aquaria. The range depends on the measured values

€18.99*
PRODACtest Ca - Calcium - Reagent 3 Refill
Refill of Reagent 3 to PRODACtest Ca - Calcium

€6.99*
Sold out
PRODACtest Fe - Iron
Water test kit for measuring the iron concentration (Fe). Suitable for fresh and marine water. Allows up to 63 tests.

€15.99*
PRODACtest GH - Total hardness test
Water test to determine the total hardness (TH). Suitable for fresh and sea water.

€11.29*
PRODACtest KH - Carbonate hardness test
Water test to determine the carbonate hardness (CH). Suitable for fresh and sea water.

€11.99*
Sold out
PRODACtest NH4/NH3 - Ammonium/Ammonia
Water test kit for measuring the ammonium/ammonia concentration (NH₄/NH₃). Suitable for fresh and marine water. Allows up to 65 tests.

€20.95*
PRODACtest NO2 - Nitrite
Water test kit for measuring the nitrite concentration (NO2). Suitable for fresh and marine water. Allows up to 60 tests.

€14.95*
PRODACtest NO3 - Nitrate test
Water test to determine the nitrate concentration (NO3). Suitable for fresh and sea water.

€19.99*
Sold out
PRODACtest pH - Operating range 4.5 - 9.0
Water test for measuring the pH value. Suitable for freshwater and seawater. Up to 130 applications possible.

€10.90*
Sold out
PRODACtest PO4 - Phosphate
Water test kit for measuring the phosphate concentration (PO4). Suitable for fresh and marine water. Allows up to 48 tests.

€17.99*

Enquiry form

Send us an e-mail. We look forward to hearing from you.

Request form
Privacy
Fields marked with asterisks (*) are required.
Thank you for your enquiry. We have received your enquiry and will get in touch with you as soon as possible.